Question

Where can I download the preset of ELA beacon sensors like the PUCK MOV / PUCK T EN12830 / PUCK MAG for the Teltonica Configurator

Answer 1

Hello,

You are confusing beacons with sensors. PUCK MOV / PUCK T EN12830 / PUCK MAG are sensors. 

Here is the link for what you need:

https://wiki.teltonika-sas.com/view/How_to_read_data_from_Blue_Puck/Coin_sensor_with_TMT250_device#Blue_Puck.2FCoin_presets

Best regards.

Comments

Thanks, for the PUCK T it works but I tried this for the MOV but it is not working.

I get connected but I see strange caracters.

Blue Puck/Coin MOV

Bluetooth BLE Movement sensor configuration

Type	Data Offset	Data Size	Action	IO	Match	Endianess	Multiplier	Offset
FE	5	2	Match	None	062A	Little Endian	1	0
FE	7	2	Save	Custom		Little Endian	1	0

 

---

Hello,

You see 'strange characters' because data WAS scanned from EAL MOV, if you see nothing - data was not scanned.

Data scanned from Ela MOV is in the hexadecimal format, but it is interpreted in the configurator I/O section as ASCII value. To the server it's sent as HEX.